Child Psychology Services (Part 3) Essay

Explain different types of bullying and the potential effects on children and young people. Bullying and the fear of bullying are major worries for many children and young people. The victims of bullying are usually different in some way from the bully; the differences may be as simple as a different physical characteristic or being seen as a ‘swot’. Bullying can be specific. The basis for the bullying can be one or more of the following forms: – Physical (pushing, kicking hitting, pinching and other forms of violence or threats). – Verbal (name-calling, insults, sarcasm, spreading rumours, persistent teasing). – Emotional (including not speaking to and excluding someone, tormenting ridicule, humiliation). – Cyber-bullying (the use of information and communications technology particularly mobile phones and the internet, deliberately to upset someone else). Bullying can be carried out by one person against another, or by groups of people ‘ganging up’ on a person. Bullying is not always delivered as a personal face -to- face attack, but can also be delivered through technology. Potential effects of bullying can be; – Threatened or attempted suicide. – Depression. – Running away. – Low self esteem. – Isolation. – Shyness. – Poor academic achievement. There are many reasons and possibilities as to why people bully, most of the time it’s because the victim is different in some way. Below are some of the  differences why someone might be bullied: – appearance (e.g. hair colour or style, height). – Race. – Religion. – Nationality. – Sexual orientation. – Being jealous. Both males and females are capable of carrying out a vicious attack such as bullying on others. Some bullies only do it to uphold their reputation and look ‘hard’. Many bullies only bully others out of jealousy and many of the people who have been bullied go on to do great things with their life, like some famous people who have been bullied. Outline the policies and procedures that should be followed in response to concerns or evidence of bullying and explain the reasons why they are in place. All schools are required by law to have anti-bulling policies in place but these vary in how they are worded and the subsequent actions that need to be taken. Schools must also have policies to encourage good behaviour and respect for others on the part for others on the part of pupils. The Department for Education is clear that no form of bullying should be tolerated. Bullying should be taken very seriously; it is not a normal part of growing up and it can ruin lives. The current anti-bulling guidance for schools, Safe to learn: embedding anti-bulling work in schools, was launched in September 2007. Explain how to support a child or young person and/or their family when bullying is suspected or alleged. When dealing with someone who is being bullied it is important to remember that they will be very upset although they may not show it on the outside. If they have managed to get up the courage to talk to you then they need to know you will take the problem seriously. In the case of an older child, it  is a good idea to ask them to write down exactly what happened and who was there so that you can speak to other people. The more information you have, the better you will be able to deal with the problem and the faster you can sort out exactly what happened. Reassure the victim that you will be back in touch with them as soon as you have completed your investigation and that if there are any more problems in the meantime they must let you know immediately. Supporting the family Parents can find it very hard to know how to help their child if they are being bullied. Some parents will have to cope with the news that it is their child who is a bully. You need to know how to support parents in both these cases. Listen to parents; let them explain how they are feeling. Direct them to useful information so that they can start to think how to support their child. Explain how to support children and young people’s self-confidence and self-esteem. Children and young people who are: – Assertive. – Self-confident. – Self-aware. – Have high self-esteem. Are less likely to be vulnerable to abuse. A child who has high self-esteem will do better in many aspects of development. Self esteem can be supported by: – Giving lots of praise and encouragement. – Encouraging independence and choice, with many opportunities to try things out. – Teaching children how to be assertive (this means having their own needs met but still respecting those of others). – Encouraging cooperation, respect and tolerance between children, and giving a positive example yourself. Analyse the importance of supporting resilience in children and young people Resilience is the ability to deal with the ups and down of life and is based on self-esteem. The more resilient a child is the more they will be able to deal with life as they grow and develop into adulthood. Many factors can positively affect a child’s resilience: – Secure early attachment. – Confidence of being loved by family and friends. – Good sense of self-identity. – Ability to act independently. – Confidence to try new things. Explain why it is important to work with the child or young person to ensure they have strategies to protect themselves and make decisions about safety. The important thing for all children to remember is that they should never feel uncomfortable about someone they are with or something being done to them. Children and young people need support to be able to keep them safe. It is important to be available to talk with children about any concerns they may have. If they are upset by a reported case of abuse, then you should be as reassuring as possible. You should stress that almost all children lead safe and happy lives and only very few adults want to hurt children in any way. Using correct anatomical language, at a level appropriate to the child, is important when you are talking about bodies. Simple, age-appropriate sessions, linked to other activities, on how the human body works help children to understand what their bodies can do and raise awareness of what is normal and what is not. Sessions on ‘body maintenance’ should be an integral part of children’s education, not just to warn them of the danger of misus e. The Keep safe Code produced by Kidscape is an effective way of getting across the message about personal safety to young children. Older children need more detailed information such as: – Lessons on normal sexual function, related to adult behaviour (relevant to your setting’s policy. – Information about misuse of their bodies, through smoking, alcohol and illegal drugs. – The risks of HIV and other sexually transmitted infections (Chlamydia, herpes, gonorrhoea, etc.). Help from other organisations Organisations such as Kidscape, Childeline and the NSPCC can help with information and guidance on these topics. It is important to use them properly and be sure that information is accurate and used to their best effect. Explain ways of empowering children and young people to make positive and informed choices that support their well being and safety. Children and young people need to be empowered to keep themselves safe. Children will always push boundaries and take risks – that is how we all learn. Your role is to manage those risks without taking away their independence. When they are empowered, and can make their own choices, they are able to do things alone and without supervision.

Applications For Integrated Circuits Information Technology Essay

Applications For Integrated Circuits Information Technology Essay An integrated circuit is the name for collections of electronic components imbedded onto a single piece of silicon. Silicon is the base for most transistors, diodes and other semiconductors. It can also be used as a resistor, capacitor and coil. Each IC is designed to carry out certain tasks and the circuit is designed accordingly. The circuit is then printed or etched onto the silicon substrate and then into a plastic or ceramic enclosure. Applications Applications for integrated circuits are as varied as the imagination of the designers. Within limits, anything that can be designed and built with discrete components can be put into an IC. Audio amplifier, video processors, logic, memory, switches, radio frequency encoders and decoders are just a few examples. The range of IC applications is vast and growing daily. One of the major applications is computing. Computers that once had thousands of transistors have been reduced to a handful of ICs. The early computers that were the siz e of a building are now outperformed in almost every way by laptops and even handheld computers because of the use if ICs As ICs are developed, the design costs and production costs of equipment are reducing. Reliability increases as large parts of the final product are enclosed in single packages, reducing assembly errors, connection problems and size of circuit boards. It is now rare to see any electronic equipment that does not have at least one IC. Indeed, some have only one IC and require no other components of any kind. The real answer to the question is to look around. Wherever electronics are used, there is probably an IC inside Many integrated circuits can be found in almost every  electronic device. They function as timers, amplifiers, logic units, counters, calculators, temperature sensors, and radio receivers. Integrated circuit of  Atmel  Diopsis 740System on Chip  showing memory blocks, logic and input/output pads around the periphery Microchips (EPROM  memor y) with a transparent window, showing the integrated circuit inside. Note the fine silver-colored wires that connect the integrated circuit to the pins of the package. The window allows the memory contents of the chip to be erased, by exposure to strong  ultraviolet light  in an eraser device. In  electronics, an  integrated circuit  (also known as  IC,  chip, or  microchip) is a miniaturized  electronic circuit  (consisting mainly of  semiconductor devices, as well as  passive components) that has been manufactured in the surface of a thin  substrate  of  semiconductor  material. Integrated circuits are used in almost all electronic equipment in use today and have revolutionized the world of electronics.  Computers,  cellular phones, and other  digital  appliances  are now inextricable parts of the structure of modern societies, made possible by the low cost of production of integrated circuits. A  hybrid integrated circuit  is a miniat urized electronic circuit constructed of individual semiconductor devices, as well as passive components, bonded to a substrate or circuit board. A monolithic integrated circuit is made of devices manufactured by diffusion of trace elements into a single piece of semiconductor substrate, a chip.

Why is there poverty in rich countries Research Paper

Why is there poverty in rich countries - Research Paper Example Some countries are doing a lot to reduce the cases of poverty though they have not fully succeeded. In this case, this study tries to explain the existences of poverty in rich countries. It, also, describes the challenges of poverty globally. Adeola (2005) explains that poverty is a challenging situation where a family or an individual cannot attain the living standards of his or her society. Definition of poverty, however, varies some explains that poverty is the lack of funds though poverty is a greatest problem in a society. For example, we think that poverty is meant by having little or no money to spend or paying bills. However, poverty is more than what many of us perceive because it affects person’s life, causing a wide range of problems such as poor health and illiteracy. Poverty brings in social problems to the community such as crime, drug abuse, and suicide. Studies by Grant and Vidler (256) explain poverty in two different ways, absolute poverty and relative poverty. At this stage, a person is described to be in absolute poverty when his or her income is not enough to acquire basic needs such as food, shelter and clothing. On the other hand, relative poverty is when an individual is poor as compared to other people. Rich countries do have people without basic needs such as housing. For example, according to Grant and Vidler (256), there were almost 1600 people sleeping outside as per the statistics in the year 2000 in England. The authors point that such cases are more in the developing countries. Relative poverty, as described above, is a situation where a person is poor as compared to other people. For example, some people can afford, accommodation, television, but may lack video player and besides, they may only afford to travel once in a week. However, such individuals might be considered rich if they were citizens of developing countries. This shows the difference

News Story Essay Example | Topics and Well Written Essays - 1000 words

News Story - Essay Example Irrespective of these market determined prices of goods and services economies goes through various phases of boom and depression, a fact that affect consumers ability to afford some goods and services over time (Martha, 1989). Tracing this changes in the 1920s indicated a need to establish measures that can help consumers boost their affordability of various goods and services (Martha, 1989). Introducing these measure which included among others credit buying were established to help consumers get goods and services which otherwise could have been out of their reach. Credit buying is where a consumer is given with a promise to pay later (Martha, 1989). It therefore means that with this mode an individual would be able to access goods and services that otherwise would have been out of his reach and pay for them later when he is able or in installment (Martha, 1989). Credit comes in different forms and has evolved since 1920s, incorporating technology and other modern means of payment. The most modern form of credit buying has incorporate the concept of plastic money and is to most popular known as credit cards (Martha, 1989) Credit buying as indicated in the introduction allows buyers to get good and services now and pay for them later (Martha, 1989). The 1920s introduced many modern conveniences and was commonly referred to as the roaring 20s for this reason. These period marked overwhelming rise of modern consumer culture (Martha, 1989). This meant rise in exciting opportunities to buy stylish clothing, cars and house appliances that defined status and comfort. Among these modern conveniences was the concept of buying on credit to help consumers buy not just within their means. With the surge of new exciting opportunities, new financing modes were introduced to help consumers cope with increasing need for an easy life (Martha, 1989). New products in the 1920s

Triple Steel Corporation Essay Example | Topics and Well Written Essays - 2000 words

Triple Steel Corporation - Essay Example As the discussion highlights in the initial assessment of the company, the current assets of the company have declined as the total worth of the company has also deteriorated comparing from the last year results. Since the revenue of the company has reduced by 2.37 Million as compared to last year, the assets of the company have also decreased but not in the same proportion. The cash and cash equivalents have decreased by 1% while the trade receivables have reduced by almost 60% which does not correspond with the loss decline in the revenue for the current year which was only 11%. The inconsistency between the two corresponding figures requires some additional concern over revenue and receivables. This paper outlines that   the inventory of Triple Steel has not decreased by the same proportion as the closing stock of the company stood at 3.55 Million which was down by 14% while the cost of goods sold was up by 1%. It has also been identified that the company has used two different methods of valuation of inventory at the year end as the method of valuation of inventory must remain constant throughout the year. In addition, the IAS doesn’t allow the use of Last-in-first-out method of valuation of inventory. The prepaid tax and insurance figures saw a decline by 23.53% as the revenue has also declined for the company and the company also incurred a loss of 49,000 this year compared to the profit of 1.795 Million last year. The property, plant and equipment of the company have increased by 3.7% which includes the purchase of land, building, equipment and machinery during the year. This has also given rise to the depreciation expense of the year which was nearly 8.8%. This may be because of the depreciation method used by the company such as the reducing balance. The current liabilities of the company have increased by 16.15% which include major increase in the amount of accounts payable which has increased by nearly 14%.

The advantages and disadvantages of Tilling as a technique in plant Essay

The advantages and disadvantages of Tilling as a technique in plant breeding - Essay Example It is a technology that used in molecular biology to directly identify mutations in genes. These technologies have their advantages that make them suitable for adoption and use by human life as well as disadvantages that make them a hazard to human life. This paper, therefore, seeks to establish the advantages and disadvantages of TILLING in plant breeding. TILLING is a molecular biology procedure that uses chemicals and x-rays to bring about undirected point mutations in a plant genome. This is usually the first step in the process. The second step involves an analysis of DNA which aids in the selection of plants that have a mutation that contains the desired gene (Schmidt et al 2011). The method combines a standard and an equally effective technique of mutagenesis with the use of a chemical mutagen such as Ethyl methanesulphonate (EMS) that contains a sensitive DNA screening method to which identifies point mutations in a target gene. This process of plant breeding may include mutation effects that may include gene deactivation and sub sequent reverse crossing with other varieties. This results with a plant that has the desirable mutation such as an amylase free potato. Some biotechnology critics such as Greenpeace have done ‘acceptance’ tests on TILLING method and have cited a large difference in genetic engineering. Some of the advantages of this biological process are; This means that the process can be applied on virtually every organism. This is because it entails modifying the molecular unit of heredity in a living organism. Therefore, plants can grow with a certain desired characteristic. This can be used to fight hunger by increasing food production. Another great advantage of TILLING in plant breeding is that the method its adaptability to high throughput genotyping. This is because it allows choosing appropriate technology for the intended goals and stage of an experiment. The method allows for the independence of the

Project Initiation Document (PID), Project Management, Heritage 59 Essay

Project Initiation Document (PID), Project Management, Heritage 59 Residence in Thailand - Essay Example Financial viability is always an important variable for commercial projects of this nature (Knight 2006) and already, financial feasibility has showed a net profit of THB 380 million over 36 months. The scope of the project clearly defines the boundaries of the project as in what will be involved in the project and what will not be involved in it. The Heritage 59 Residence project will comprise of a two building edifice that is located Sukhumvit Road. The first building will be a maintained 12-storey building at the front side of the site. The second building will be a reconstruction of the existing 3 story-building into a 27-storey at the back side of the site. The proposed financial scope given to the project is THB 85,000 per Sqm with the total land size of project being 806 sq.m to be completed in 36 calendar months. The scope described is graphically represented below Achievable It is important not to set an objective that will be excessively difficult to achieve. The project objective has therefore been defined to be moderate and made up fulfilling all legal provisions that were given in the course of seeking permit for the site plan. Relevant At the end of the project, there should be specific benefits that can be pointed to as the outcome of the project and this is to make a commercial gain of THB 380 million out of the project. Of the tasks, the procedure of construction team and materials will be the most highlighted. Generally, a bid will be opened for interested suppliers to tender. An executive from the Tender Board will be consulted to oversee this process. The project manager will then put in the procedures for procurement to begin by following the steps laid down by the National Procurement Board. The procurement, which is to centre stage will be undertaken through